Keying in the service settings manually
1. Press
Menu
, and select
Services
,
Settings
and
Connection settings
.
2. Select
Active service settings
.
3. Scroll to the connection set you would like to activate and press
Activate
.
You need to activate the connection set where you want to save the service settings. A connection
set is a collection of settings required to make a connection to a service.
4. Select
Edit active service settings
.
Select each of the settings one by one and key in all the required settings according to the
information you have received from your network operator or service provider.
Copyright
© 2004 Nokia. All rights reserved.
Us
in
g t
h
e
m
e
nu
98
Us
in
g t
h
e
m
e
nu
•
Settings’ name
- Key in the new name for the connection set.
•
Homepage
- Key in the homepage address (start page) of the service that you want to use, press
for a dot.
•
Session mode
- Select
Permanent
or
Temporary
.
•
Connection security
- Select
On
or
Off
.
When the connection security is
On
, the phone tries to use a secure connection with the service.
If a secure connection is not available, the connection will not be made. If you wish to connect
anyway, with a non-secure connection, you must set the connection security to
Off
.
•
Data bearer
- Select
GSM data
or
GPRS
. Settings for the selected bearer, see Settings when GSM
data is the selected data bearer and Settings when GPRS is the selected data bearer below.
For pricing, connection speed and other information, contact your network operator or service
provider.
Settings when GSM data is the selected data bearer
•
Dial-up number
- Key in the phone number.
•
IP address
- Key in the address, press
for a dot.
•
Authentication type
- Select
Secure
or
Normal
.
•
Data call type
- Select
Analogue
or
ISDN
.
•
Data call speed
- Select the speed you want to use, or select
Automatic
.
Automatic
is available
only if the current selected data call type is
Analogue
. The actual data call speed depends on the
service provider.
•
Login type
- Select
Manual
or
Automatic
.
•
User name
- Key in the user name.
•
Password
- Key in the password.
Copyright
© 2004 Nokia. All rights reserved.
Us
in
g t
h
e
m
e
nu
99
Us
in
g t
h
e
m
e
nu
Settings when GPRS is the selected data bearer
•
GPRS connection
- Select
When needed
or
Always online
.
•
GPRS access point
- Key in the access point name.
An access point name is needed to establish a connection to a GPRS network. You obtain the
access point name from your network operator or service provider.
•
IP address
- Key in the address, press
for a dot. You obtain the IP address from your network
operator or service provider.
•
Authentication type
- Select
Secure
or
Normal
.
•
Login type
- Select
Manual
or
Automatic
. If you select
Automatic
, the login type uses the user
name and password keyed in the following settings. If you select
Manual
, the login information
is required when establishing a connection.
•
User name
- Key in the user name.
•
Password
- Key in the password.